Engineering Disclaimer

Last updated: September, 2026

Information provided by Evoaeo through its website, technical materials, communications, calculations, preliminary recommendations, laboratory discussions, and other resources is intended to support technical evaluation of industrial wastewater treatment applications.

Unless expressly stated otherwise in a signed written agreement, such information does not constitute final engineering certification, a guaranteed treatment result, or professional approval for construction or regulatory compliance.

1. General Technical Information

The Evoaeo website contains information related to:

  • electro oxidation;
  • electrochemical wastewater treatment;
  • industrial wastewater treatment;
  • organic pollutant degradation;
  • electrode technology;
  • treatment system configuration;
  • wastewater reuse and recycling.

This information is provided for technical reference and general educational purposes.

Industrial wastewater conditions vary significantly between facilities. Information that is suitable for one wastewater stream may not be suitable for another.

2. Preliminary Engineering Recommendations

Evoaeo may provide preliminary recommendations based on information supplied by customers.

These recommendations may consider:

  • wastewater composition;
  • flow rate;
  • COD;
  • pH;
  • conductivity;
  • salinity;
  • contaminant type;
  • treatment objectives;
  • existing treatment equipment.

Preliminary recommendations are based on the information available at the time of evaluation.

They may change when additional analytical data, laboratory testing, pilot results, or site information becomes available.

3. Wastewater Data Accuracy

Customers are responsible for providing accurate and representative wastewater information.

Incorrect or incomplete information may affect:

  • equipment sizing;
  • process selection;
  • electrode configuration;
  • power requirements;
  • treatment performance;
  • operating cost estimates.

Evoaeo is not responsible for errors resulting from inaccurate, incomplete, or nonrepresentative information supplied by customers or third parties.

4. Laboratory and Pilot Testing

Laboratory and pilot testing can provide useful treatment data but may not fully reproduce full-scale industrial operating conditions.

Differences may arise from:

  • wastewater variability;
  • flow fluctuations;
  • temperature;
  • scaling;
  • fouling;
  • solids loading;
  • operating schedules;
  • upstream process changes.

Pilot or laboratory results should therefore be interpreted within the specific conditions under which testing was performed.

5. Treatment Performance

Electrochemical treatment performance depends on multiple factors, including:

  • electrode material;
  • reactor configuration;
  • current density;
  • hydraulic retention time;
  • conductivity;
  • pH;
  • temperature;
  • contaminant concentration;
  • competing compounds;
  • pretreatment;
  • maintenance.

Published removal efficiencies or performance examples should not be interpreted as guaranteed results for every wastewater stream.

Where performance guarantees are required, they should be specifically defined in a written project agreement.

6. Regulatory Requirements

Environmental discharge and reuse requirements vary by jurisdiction and facility.

Customers are responsible for identifying applicable:

  • discharge standards;
  • permits;
  • reuse standards;
  • occupational requirements;
  • electrical codes;
  • environmental regulations.

Evoaeo may provide technical support relating to treatment design, but customers remain responsible for obtaining required permits and approvals unless otherwise agreed.

7. System Integration

Electro oxidation systems may operate as:

  • standalone treatment units;
  • pretreatment systems;
  • polishing systems;
  • part of a multi-stage treatment process.

Overall system performance may depend on equipment and processes outside Evoaeo’s control.

These may include:

  • equalization;
  • filtration;
  • biological treatment;
  • membranes;
  • chemical dosing;
  • sludge treatment;
  • upstream production processes.

8. Construction and Installation

Technical drawings, layouts, and equipment information supplied during preliminary discussions should not automatically be treated as final construction drawings.

Final installation should consider:

  • structural requirements;
  • electrical requirements;
  • piping;
  • ventilation;
  • drainage;
  • chemical handling;
  • site safety;
  • local codes.

Final construction responsibility should be defined in the applicable project agreement.

9. Operating Safety

Industrial wastewater treatment equipment may involve:

  • electricity;
  • chemicals;
  • oxidants;
  • gases;
  • pressurized systems;
  • corrosive environments.

Only properly trained personnel should operate or maintain treatment equipment.

Customers should follow applicable safety procedures, equipment instructions, and local occupational requirements.

10. Changes in Operating Conditions

Treatment performance may change when operating conditions change.

Material changes may include:

  • increased pollutant concentration;
  • different chemical composition;
  • increased flow;
  • changes in production processes;
  • new process chemicals;
  • changes in salinity;
  • changes in pH.

Customers should notify Evoaeo when wastewater conditions differ substantially from the original design basis.

11. No Automatic Professional Certification

Unless expressly stated in writing, technical information provided through the Website or general communication does not constitute:

  • regulatory certification;
  • professional engineering certification;
  • environmental approval;
  • guaranteed compliance;
  • construction authorization.

12. Contact

For engineering or wastewater treatment inquiries:

Company: Evoaeo

Website:
https://www.evoaeo.com

Email:
inquiry@evoaeo.com

Scroll to Top